Spack Spray
A professional-grade texture maker, ideal for restoring and refreshing both existing and new textured finishes. It is applicable on surfaces such as concrete, drywall, plaster, wood, etc. The spray offers high build and is excellent for repainting with all common wall paints.
Key Features:
High build and excellent coverage.
Suitable for use on various surfaces, including concrete, gypsum board, plaster, and wood.
Can be applied in both fine and coarse textures by varying the layer thickness and spraying distance.
Excellent overpaintability with standard wall paints.
Optionally pre-treat with Workin Stain Sealer/Insulating Spray.
Instructions for Use:
Ensure the surface is clean, dry, and grease-free.
Shake the spray can thoroughly for 2 minutes before and during use.
Protect adjacent surfaces by masking or covering them.
Adjust the texture by varying the spraying distance and layer thickness for either fine or coarse textures.
For multiple layers, allow a 10-minute drying time between coats.
Ideal application temperature is between 15 to 20°C. The temperature of the can affects the texture; if the can cools down during spraying, the texture will become coarser. For a finer texture, lightly warm the can under lukewarm running water.
After use, turn the spray can upside down and press the nozzle for about 5 seconds to clear it. Detach the nozzle and rinse it under running water.
Important Notes:
The propellant is highly flammable. Do not smoke, use open flames, or glowing objects (such as space heaters) during use.
Ensure adequate ventilation during use.
Exclusively for industrial use.